Please use this identifier to cite or link to this item:
http://dspace.uniten.edu.my/jspui/handle/123456789/11440
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Roslan, A.F. | en_US |
dc.contributor.author | Kaharudin, K.E. | en_US |
dc.contributor.author | Salehuddin, F. | en_US |
dc.contributor.author | Zain, A.S.M. | en_US |
dc.contributor.author | Ahmad, I. | en_US |
dc.contributor.author | Faizah, Z.A.N. | en_US |
dc.contributor.author | Hazura, H. | en_US |
dc.contributor.author | Hanim, A.R. | en_US |
dc.contributor.author | Idris, S.K. | en_US |
dc.contributor.author | Zaiton, A.M. | en_US |
dc.contributor.author | Mohamad, N.R. | en_US |
dc.contributor.author | Hamid, A.M.A. | en_US |
dc.date.accessioned | 2019-01-08T08:53:49Z | - |
dc.date.available | 2019-01-08T08:53:49Z | - |
dc.date.issued | 2018 | - |
dc.description.abstract | The simulation and statistical modeling are conducted using Silvaco TCAD tools and L9 orthogonal array (OA) of Taguchi method respectively to design a proposed layout of 10 nm gate length (Lg) Bilayer Graphene Field Effect Transistor (Bi-GFET). The investigated process parameters are halo implant dose. halo implant energy, source/drain (S/D) implant dose and source/drain (S/D) implant energy, while the noise factors are halo implant tilt angle and source/drain (S/D) implant tilt angle. The process parameters and the noise factors are optimized using the L9 orthogonal array (OA) of Taguchi method to achieve the highest possible ION/IOFF ratio. Utilizing both signal-to-noise ratio (SNR) and analysis of variance (ANOVA), the most dominant process parameters upon ION/IOFF ratio are identified as S/D implant energy and S/D implant dose with 56% and 37% factor effects on SNR respectively. The largest factor effects on SNR of S/D implant energy shows that it has dominantly affected the ION/IOFF ratio. The final results indicate that the 1.99 × 1013 atom/cm3 of halo implant dose. 174 keV of halo implant energy, 1.63 × 1014 atom/cm3 of S/D implant dose, 17 keV of S/D implant energy, 24° of halo implant tilt angle and 9° of S/D implant tilt angle are the best parameter setting in obtaining the highest Ion/Ioff ratio of the device which is measured at 4.811 × 105. © Published under licence by IOP Publishing Ltd. | |
dc.language.iso | en | en_US |
dc.title | Optimization of 10nm Bi-GFET Device for higher ION/IOFF ratio using Taguchi Method | en_US |
dc.type | Conference Paper | en_US |
dc.identifier.doi | 10.1088/1742-6596/1123/1/012046 | - |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
Appears in Collections: | UNITEN Scholarly Publication |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.