Please use this identifier to cite or link to this item:
Title: Optimization of input process parameters variation on threshold voltage in 45 nm NMOS device
Authors: Salehuddin, F. 
Ahmad, I. 
Hamid, F.A. 
Zaharim, A. 
Hashim, U. 
Apte, P.R. 
Issue Date: 2011
Abstract: In this study, Taguchi method was used to optimize the influence of process parameter variations on threshold voltage (VTH) in 45 nm n-channel metal oxide semiconductor (NMOS) device. The orthogonal array, the signal-to-noise ratio, and analysis of variance were employed to study the performance characteristics of a device. In this paper, eleven process parameters (control factors) were varied for 2 levels to perform 12 experiments. Whereas, the two noise factors were varied for 2 levels to get four readings of VTH for every row of experiment. VTH results were used as the evaluation variable. This work was done using technology computer-aided design (TCAD) simulator, consisting of a process simulator, ATHENA and device simulator, ATLAS. These two simulators were combined with Taguchi method to aid in design and optimize the process parameters. In this research, compensation implantation energy was identified as one of the process parameters that have the strongest effect on the response characteristics. While the halo implantation dosage was identified as an adjustment factor to get the nominal values of threshold voltage for NMOS device equal to 0.176 V. © 2011 Academic Journals.
DOI: 10.5897/IJPS11.401
Appears in Collections:COE Scholarly Publication

Show full item record

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.