Please use this identifier to cite or link to this item:
|Title:||Simulation analysis on CIGS solar cell on different absorber layer thickness subject to temperature change using SCAPS 1-D software||Authors:||Harif, M.N.
Mahmood Zuhdi, A.W.
|Issue Date:||2018||Abstract:||The Copper Indium Gallium Selenide (CIGS) solar cell due to temperature change has been studied and the analysis was simulated using SCAPS 1-D software with the operating temperature varied from 25°C to 50°C. There are 3 parameters of thickness of CIGS absorber layer had been taken into account. The output characteristics were analyzed through a graphical method. The results showed a decreasing performance on the temperature change with respect to the efficiency, fill factor (FF) and open circuit voltage (Voc) except for short circuit current density (Jsc). The average degradation of efficieny, fill factor and open circuit voltage with respect to temperature are 7.87%, 1.61 % and 6.81 % respectively while short current density increase 0.50%. It can also be suggested that there are significant direct correlations between band gap energy and temperature change. © 2018 IEEE.||DOI:||10.1109/SMELEC.2018.8481333|
|Appears in Collections:||UNITEN Scholarly Publication|
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.