Please use this identifier to cite or link to this item:
|Title:||Responsivity optimization of a MQW SOI-based lateral PIN photodiode using Taguchi's L27 orthogonal array||Authors:||Menon, P.S.
|Issue Date:||2013||Abstract:||Silicon-on-insulator (SOI)-based lateral PIN photodiodes using SiGe/Si multilayer quantum wells (MQW) are suitable for applications in the near-infrared range both for sensing and optical fiber communication application. The objective of this paper is to optimize the process parameters for such a device using Taguchi's L27 orthogonal array. Five device process parameters and two device noise factors were identified to make the virtual device design insensitive to variation in the selected fabrication parameters. The results obtained for responsivity after the optimization approach was 0.33 A/W for the optimized device with intrinsic region length of 6 μm, photo-absorption layer thickness of 0.505 μm, incident optical power of 0.5 mW/cm2, bias voltage of 3.5 V and SOI layer thickness of 0.5 μm. The percentage of improvement for the device's responsivity is 27% as compared to the previous work. © 2013 IEEE.||DOI:||10.1109/RSM.2013.6706523|
|Appears in Collections:||COE Scholarly Publication|
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.