Please use this identifier to cite or link to this item: http://dspace.uniten.edu.my/jspui/handle/123456789/6566
Title: Effect of EDF position on the performance of hybrid dispersion-compensating Raman/EDF amplifier
Authors: Ali, M.H. 
Abdullah, F. 
Jamaludin, M.Z. 
Al-Mansoori, M.H. 
Al-Mashhadani, T.F. 
Abass, A.K. 
Issue Date: 2013
Abstract: The effect of the location of the Erbium-doped fiber (EDF) on the performance of the hybrid dispersion compensation of Raman/EDF amplifier is discussed in this study. Two different configuration set-ups were determined according to the position of the EDF amplifier. The setup in which EDF A is positioned before is denoted by type A, while type B denotes the setup in which EDFA is positioned after. In these two amplifier configurations, the Raman gain saturation due to the Stimulated Brillouin scattering (SBS) effect is included. Type B shows a better hybrid fiber amplifier (HF A) performance in terms of overall gain, noise figure (NF), and flatness gain profile. A small signal gain of 33 and 35 dB with a flat gain bandwidth of 40 nm is achieved for types A and B, respectively. In addition, type B exhibits a high peak gain of 23 dB, with gain variation of 3 dB along 70 nm bandwidth for large input signal compared with the 17 dB peak gain of type A with gain variation of 4.4 dB along the same bandwidth. © 2013 IEEE.
URI: http://dspace.uniten.edu.my/jspui/handle/123456789/6566
Appears in Collections:COE Scholarly Publication

Show full item record

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.