Please use this identifier to cite or link to this item:
|Title:||Turbulent flow over transitionally rough surfaces with varying roughness densities||Authors:||Macdonald, M.
|Issue Date:||2016||Abstract:||We investigate rough-wall turbulent flows through direct numerical simulations of flow over three-dimensional transitionally rough sinusoidal surfaces. The roughness Reynolds number is fixed at , where is the sinusoidal semi-amplitude, and the sinusoidal wavelength is varied, resulting in the roughness solidity (frontal area divided by plan area) ranging from 0.05 to 0.54. The high cost of resolving both the flow around the dense roughness elements and the bulk flow is circumvented by the use of the minimal-span channel technique, recently demonstrated by Chung eta al. (J. Fluid Mech., vol. 773, 2015, pp. 418-431) to accurately determine the Hama roughness function, . Good agreement of the second-order statistics in the near-wall roughness-affected region between minimal- and full-span rough-wall channels is observed. In the sparse regime of roughness the roughness function increases with increasing solidity, while in the dense regime the roughness function decreases with increasing solidity. It was found that the dense regime begins when , in agreement with the literature. A model is proposed for the limit of , which is a smooth wall located at the crest of the roughness elements. This model assists with interpreting the asymptotic behaviour of the roughness, and the rough-wall data presented in this paper show that the near-wall flow is tending towards this modelled limit. The peak streamwise turbulence intensity, which is associated with the turbulent near-wall cycle, is seen to move further away from the wall with increasing solidity. In the sparse regime, increasing reduces the streamwise turbulent energy associated with the near-wall cycle, while increasing in the dense regime increases turbulent energy. An analysis of the difference of the integrated mean momentum balance between smooth- and rough-wall flows reveals that the roughness function decreases in the dense regime due to a reduction in the Reynolds shear stress. This is predominantly due to the near-wall cycle being pushed away from the roughness elements, which leads to a reduction in turbulent energy in the region previously occupied by these events. © 2016 Cambridge University Press.||URI:||http://dspace.uniten.edu.my/jspui/handle/123456789/9430|
|Appears in Collections:||COE Scholarly Publication|
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.