| Issue Date | Title | Author(s) |
| 1 | 2015 | Comparison of the effect of filter designs on the total harmonic distortion in three-phase stand-alone photovoltaic systems | Kean, Y.W. ; Yong, P.S. ; Ramasamy, A. ; Ramachandaramurthy, V.K. |
| 2 | 2012 | Comparison of cell centered and cell vertex scheme in the calculation of high speed compressible flows | Rahman, S. ; Yusoff, Mohd.Z. ; Hasini, H. |
| 3 | 2013 | Comparison study on shear strength and intermetallic compound for SAC and polymer core solder balls | Kar, Y.B. ; Agileswari ; Hui, T.C. ; Talik, N.A. |
| 4 | 2013 | Comparison study on reliability performance for polymer core solder balls under multiple reflow and HTS stress tests | Kar, Y.B. ; Hui, T.C. ; Agileswari, R. ; Lo, C. |
| 5 | 2016 | Comparison of various types of biomedia in river water treatment using attached growth activated sludge process | Hayder, G. ; Sidek, L.M. ; Mohiyaden, H.A. ; Basri, H. ; Ming Fai, C. |
| 6 | 2010 | Contingency based congestion management and cost minimization using bee colony optimization technique | Rahim, M.N.A. ; Musirin, I. ; Abidin, I.Z. ; Othman, M.M. |
| 7 | 2010 | Congestion management based optimization technique using bee colony | Rahim, M.A. ; Musirin, I. ; Abidin, I.Z. ; Othman, M.M. ; Joshi, D. |
| 8 | 2012 | Computational fluid dynamics investigation on the use of heat shields for thermal management in a car underhood | Lam, S.Y. ; Shuaib, N.H. ; Hasini, H. ; Shuaib, N.A. |
| 9 | 2009 | Continual improvement and assessment plan for Mechanical Engineering Programme in UNITEN | Anuar, A. ; Shuaib, N.H. ; Mohamed Sahari, K.S. ; Abidin, I.Z. |
| 10 | 2007 | Control of Dynamic Voltage Restorer using TMS320F2812 | Ramasamy, A. ; Ramachandaramurthy, V.K. ; Iyer, R.K. ; Liew, Z.L. |
| 11 | 2009 | Corticosteroids and insulin resistance in the ICU | Pretty, C. ; Chase, J.G. ; Lin, J. ; Shaw, G. ; Le Compte, A. ; Razak, N. ; Parente, J. |
| 12 | 2013 | Design and development of a new electromagnetic prime mover solenoid powered engine preliminary design | Bahrin, S.Z.A.S.K. ; Amirulddin, U.A.U. |
| 13 | 2010 | Delay analysis of DBA using fuzzy logic for upstream EPON | Radzi, N.A.M. ; Md. Din, N. ; Al-Mansoori, M.H. ; Mustafa, I.S. ; Abd. Majid, M.S. |
| 14 | 2014 | Design and optimization of spray unit holder and shaft assembly of a linear motor operated spray gun | Parvez Iqbal, A.K.M. ; Aris, I. ; Rahman, M.M. ; Misron, N. |
| 15 | 2014 | Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic) | Bahrin, S.Z.A.S.K. ; Amirulddin, U.A.U. |
| 16 | 2014 | Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine mathematical derivations (inductance variation) | Bahrin, S.Z.A.S.K. ; Amirulddin, U.A.U. |
| 17 | 2013 | Design and optimization of the housing of spray unit of a linear motor operated spray gun | Parvez Iqbal, A.K.M. ; Aris, I. ; Rahman, M.M. ; Misron, N. |
| 18 | 2013 | Design and fabrication of a cool box for passenger car using automotive air-conditioning system | Parvez Iqbal, A.K.M. ; Rahman, M.M. |
| 19 | 2013 | Detection of VLF and LF emissions of fluorescent light for efficient management of power consumption | Othman, S.S.B.S. ; Hock, G.C. ; Nordin, F.H.B. ; Mustafa, N.B.B.A. ; Balasubramaniam, N. ; Sharrif, Z.A.M. |
| 20 | 2012 | Design of outer rotor single phase squirrel cage induction motor | Mohammed, K.G. ; Ramli, A.Q. ; Ungku Amirulddin, U.A. |
| 21 | 2014 | Determining the different learning styles of students from different engineering programmes in UNITEN | Long, C.Y. ; Jern, K.P. ; Khalid, N.H.B.N. |
| 22 | 2011 | Development of a model-based clinical sepsis biomarker for critically ill patients | Lin, J. ; Parente, J.D. ; Chase, J.G. ; Shaw, G.M. ; Blakemore, A.J. ; LeCompte, A.J. ; Pretty, C. ; Razak, N.N. ; Lee, D.S. ; Hann, C.E. ; Wang, S.-H. |
| 23 | 2014 | Development of a reliable low cost six-pulse generator for power electronics laboratory works in Universiti Tenaga Nasional | Azau, M.A.M. ; Jaafar, S. ; Meng, T.G. |
| 24 | 2015 | Development of a portable solar-powered traffic light control system for a remote single lane bridge | Azau, M.A.M. ; Jaafar, S. ; Saedon, M.Y. |
| 25 | 2012 | Development of brick using thermal power plant bottomash and fly ash | Naganathan, S. ; Subramaniam, N. ; Nasharuddin Bin Mustapha, K. |
| 26 | 2013 | Development of sediment brick utilizing reservoir sediment and fly ash | Mohammed, B.S. ; Woen, E.L. ; Malek, M.A. ; Sing, W.L. ; Abbas, N.A. ; Yusop, H. ; Muda, R.S. ; Hashim, M. ; Yong, U. |
| 27 | 2013 | Development of corrosion risk map for Peninsular Malaysia using climatic and air pollution data | Fathoni, U. ; Zakaria, C.M. ; Rohayu, C.O. |
| 28 | 2013 | Development of self-compacting concrete using contrast constant factorial design | Alqadi, A.N.S. ; Bin Mustapha, K.N. ; Naganathan, S. ; Al-Kadi, Q.N.S. |
| 29 | 2009 | Development of improved three dimensional unstructured tetrahedral mesh generator | Luon, N.Y. ; Yusoff, M.Z. ; Shuaib, N.H. |
| 30 | 2013 | Dynamic communication for smart metering: Leading edge for sustainable energy and PHEV | Syed, Z.I. ; Norman, M. ; Lutfi, O. ; Hashim, H. ; Izham, Z. |
| 31 | 2008 | Double-pass chirped bragg grating erbium-doped fiber amplifier: Improved transmission distance | Jamaludin, M.Z. ; Abdullah, M.K. ; Abdullah, F. ; Rahman, F.A. ; Mahdi, M.A. |
| 32 | 2005 | Double-pass EDFA with built-in variable optical Bragg grating | Jamaludin, M.Z. ; Bakar, A.A.A. ; Abdullah, F. ; Rahman, F.A. ; Mahdi, M.A. ; Abdullah, M.K. |
| 33 | 2011 | Discriminant Tchebichef based moment features for face recognition | Tiagrajah, V.J. ; Jamaludin, O. ; Farrukh, H.N. |
| 34 | 2012 | Effect of curing environments on strength, porosity and chloride ingress resistance of blast furnace slag cement concretes: A construction site study | Chen, H.-J. ; Huang, S.-S. ; Tang, C.-W. ; Malek, M.A. ; Ean, L.-W. |
| 35 | 2012 | Dynamic hierarchical bandwidth allocation using Russian Doll Model in EPON | Sadon, S.K. ; Din, N.M. ; Al-Mansoori, M.H. ; Radzi, N.A. ; Mustafa, I.S. ; Yaacob, M. ; Majid, M.S.A. |
| 36 | 2015 | Effect of cascading amplification stages on the performance of serial hybrid fiber amplifier | Ali, M.H. ; Abdullah, F. ; Jamaludin, M.Z. ; Al-Mansoori, M.H. ; Abass, A.K. ; Al-Mashhadani, T.F. |
| 37 | 2014 | Dynamic regression intervention modeling for the Malaysian daily load | Razak, F.A. ; Shitan, M. ; Hashim, A.H. ; Abidin, I.Z. |
| 38 | 2008 | Dynamic voltage restorer lab prototype | Ramasamy, A.K. ; Ramachandaramurthy, V. ; Iyer, R.K. |
| 39 | 2013 | Effect of EDF position on the performance of hybrid dispersion-compensating Raman/EDF amplifier | Ali, M.H. ; Abdullah, F. ; Jamaludin, M.Z. ; Al-Mansoori, M.H. ; Al-Mashhadani, T.F. ; Abass, A.K. |
| 40 | 2011 | Effect of polypropylene fibres on fresh and hardened properties of self-compacting concrete at elevated temperatures | Al Qadi, A.N.S. ; Mustapha, K.N.B. ; Naganathan, S. ; Al-Kadi, Q.N.S. |
| 41 | 2013 | Effect of polypropylene fibers on thermogravimetric properties of self-compacting concrete at elevated temperatures | Al Qadi, A.N.S. ; Bin Mustapha, K.N. ; Naganathan, S. ; Al-Kadi, Q.N.S. |
| 42 | 2014 | Effect of quarry dust and billet scale additions on the properties of fly ash bricks | Shakir, A.A. ; Naganathan, S. ; Bin Mustapha, K.N. |
| 43 | 2016 | Effect of Steel Fibres Distribution on Impact Resistance Performance of Steel Fibre Reinforced Concrete (SFRC) | Muda, Z.C. ; Kamal, N.L.M. ; Syamsir, A. ; Yang, C.S. ; Beddu, S. ; Mustapha, K.N. ; Thiruchelvam, S. ; Usman, F. ; Itam, Z. ; Alam, M.A. ; Birima, A.H. ; Zaroog, O.S. |
| 44 | 2012 | Effect of uni-directional and bi-directional cavity structure on the performance of Brillouin fiber laser | Al-Mashhadani, T.F. ; Al-Mansoori, M.H. ; Jamaludin, M.Z. ; Abdullah, F. ; Abass, A.K. |
| 45 | 2016 | Effect of Synthesis Methods Using Renewable PODFA on Structural Characteristics of Metal-Organic Framework (MOF-5) | Othman, S.Z. ; Misran, H. ; Affendy, W.A. ; Mahadi, N.F. |
| 46 | 2017 | Efficacy and safety of SPRINT and STAR protocol on Malaysian critically-ill patients | Ahamad, N. ; Razak, N. ; Jamaluddin, U. ; Suhaimi, F. ; Pretty, C. ; Chase, G. ; Ralib, A. ; Noor, B.M. |
| 47 | 2013 | Effects of geometrical parameters on the flow and heat transfer characteristics in trapezoidal-corrugated channel using nanofluid | Ahmed, M.A. ; Yusoff, M.Z. ; Shuaib, N.H. |
